How to apply BulletProof Windshield Protectant

A simple 15 min application

Please contact us at 1-866-607-3672 if you have any

questions regarding the application process. We are

available 8:30 to 5:30 EST Monday through Friday.

Watch Installation Video Here

Easy to apply four Stage Process

Treatment is applied by you. Process takes about 15 to 17 minutes per vehicle

INITIAL TREATMENT

(1) Stage One wipe-on Micro Cleanser. Squirt product onto glass and wipe on with clean cloth until windshield glass is clean. The Micro Cleanser removes dirt, grime and moisture from the porous glass surface. Though it looks clean, there will be a residue remaining.

(2) Stage Two wipe-On Surface Prep. Squirt product onto glass and wipe on with clean cloth until windshield glass is free from any residence or remaining grime. The Surface Prep removes the residue left from the Micro Cleanser and prepares the surface for application of the Protectant.

(3) Stage Three spray-on Windshield Protectant - Spray on lightly, wipe onto glass surface with clean cloth, coating entire glass surface, and allow to dry or “cure” for 5-6 mins. After curing, wipe residue of with wet cloth. Then buff out crystal clean with dry cloth. Glass NOTE: Repeat Step Three during initial installation for a total of 2 initial coats of protectant

(4) Stage Four pour-in Washer Fluid Booster / Cleaner is then poured into washer fluid reservoir to help keep treated surface clean and help maintain superior water repellency on a day to day basis. Should be mixed with no less than 1 full reservoir of clean water.

ONGOING TREATMENTS

Glass is cleaned and protectant reapplied every 4 months to maintain protection from road debris, sand and environmental contaminates.

(1) Apply Stage Two - Surface Prep to clean glass and prepare for

protectant.

(2) Apply Stage Three - Windshield Protectant (one coat only)

(3) Replenish washer reservoir with Stage Four Washer Fluid Booster (1.25 oz Booster to gallon water mixture)

Buy Windshield Protectant Now - Click Here!